Viewing The Contents Of The Management Server Database; Clearing The Management Server Database; Controlling Topology Discovery - HP A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

1 Display the access list
2 Add member based on its Port/Node WWN
3 Delete member based on its Port/Node WWN
select : (0..3) [1] 0
done ...
Update the FLASH?
*Successfully saved the MS ACL to the flash.
switch:admin>

Viewing the contents of the management server database

The Management Server database can be viewed or cleared. The command msPlClearDB is allowed
only in AD0 and AD255.
To view the contents of the Management Server database:
1. Connect to the switch and log in as admin.
2. Enter the msPlatShow command.
The contents of the Management Server platform database are displayed.
switch:admin> msplatshow
--------------------------------------------------
Platform Name: [9] "first obj"
Platform Type: 5 : GATEWAY
Number of Associated M.A.: 1
[35] "http://java.sun.com/products/plugin"
Number of Associated Node Names: 1
Associated Node Names:
10:00:00:60:69:20:15:71
--------------------------------------------------
Platform Name: [10] "second obj"
Platform Type: 7 : HOST_BUS_ADAPTER
Number of Associated M.A.: 1
Associated Management Addresses:
[30] "http://java.sun.com/products/1"
Number of Associated Node Names: 1
Associated Node Names:
10:00:00:60:69:20:15:75

Clearing the management server database

1. Connect to the switch and log in as admin.
2. Enter the msplClearDb command.
Enter y to confirm the deletion.
3.
The Management Server platform database is cleared.

Controlling topology discovery

The topology discovery feature can be displayed, enabled, and disabled; it is disabled by default. The
commands mstdEnable and mstdDisable are allowed only in AD0 and AD255.
To display topology discovery status:
1. Connect to the switch and log in as admin.
2. Enter the mstdReadConfig command.
(yes, y, no, n): [yes] y
Fabric OS 6.1.x administrator guide 247