Vsan; Fabric Building Commands; Allowed-Domain-Id - HP 5920 Series Command Reference Manual

vsan

Use vsan to create a VSAN and enter VSAN view. If the VSAN already exists, this command directly
leads you to VSAN view.
Use undo vsan to delete a VSAN.
Syntax
vsan vsan-id
undo vsan vsan-id
Default
Only the default VSAN (VSAN 1) exists.
Views
System view
Predefined user roles
network-admin
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
You cannot create or delete VSAN 1, because it is the system-default VSAN. You can create VSANs 2 to
3839.
The maximum number of VSANs (including VSAN 1) that can be created is 16.
Examples
# Create VSAN 10 and enter its view.
<Sysname> system-view
[Sysname] vsan 10
[Sysname-vsan10]

Fabric building commands

allowed-domain-id

Use allowed-domain-id to configure an allowed domain ID list for a VSAN.
Use undo allowed-domain-id to restore the default.
Syntax
allowed-domain-id domain-id-list
undo allowed-domain-id domain-id-list
Default
The allowed domain ID list includes domain IDs 1 to 239.
49