Dial Plan Timer (Off-Hook Timer); Interdigit Long Timer (Incomplete Entry Timer) - Cisco WRP500 Administration Manual

Chapter 3 Configure Voice Services
R E V I E W D R A F T # 1 — C I S C O C O N F I D E N T I A L

Dial Plan Timer (Off-Hook Timer)

You can think of the Dial Plan Timer as "the off-hook timer." This timer starts counting when the phone
goes off hook. If no digits are dialed within the specified number of seconds, the timer expires and the
null entry is evaluated. Unless you have a special dial plan string to allow a null entry, the call is rejected.
The default value is 5.
Syntax for the Dial Plan Timer
SYNTAX: (Ps<:n> | dial plan )
•
•
Examples for the Dial Plan Timer
•
•
•

Interdigit Long Timer (Incomplete Entry Timer)

You can think of this timer as the "incomplete entry" timer. This timer measures the interval between
dialed digits. It applies as long as the dialed digits do not match any digit sequences in the dial plan.
Unless the user enters another digit within the specified number of seconds, the entry is evaluated as
incomplete, and the call is rejected. The default value is 10 seconds.
s: The number of seconds; if no number is entered after
applies.
n: (optional): The number to transmit automatically when the timer expires; you can enter an
extension number or a DID number. No wildcard characters are allowed because the number
will be transmitted as shown. If you omit the number substitution, <:n>, then the user hears a
reorder (fast busy) tone after the specified number of seconds.
Allow more time for users to start dialing after taking a phone off hook.
EXAMPLE: (P9 | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
P9 After taking a phone off hook, a user has 9 seconds to begin dialing. If no digits are pressed
within 9 seconds, the user hears a reorder (fast busy) tone. By setting a longer timer, you allow more
time for users to enter the digits.
Create a hotline for all sequences on the System Dial Plan
EXAMPLE: (P9<:23> | (9,8<:1408>[2-9]xxxxxx | 9,8,1[2-9]xxxxxxxxx | 9,8,011xx. |
9,8,xx.|[1-8]xx)
P9<:23> After taking the phone off hook, a user has 9 seconds to begin dialing. If no digits are
pressed within 9 seconds, the call is transmitted automatically to extension 23.
Create a hotline on a line button for an extension
EXAMPLE: ( P0 <:1000>)
With the timer set to 0 seconds, the call is transmitted automatically to the specified extension when
the phone goes off hook. Enter this sequence in the Phone Dial Plan for Ext 2 or higher on a client
station.
Configure Dial Plans
, the default timer of 5 seconds
P
Cisco WRP500 Administration Guide
3-15