Show Lacp Ethernet - Dell PowerConnect 3524 Cli Reference Manual

Example
The following example assigns a long administrative LACP timeout to Ethernet port 1/e6 .
Console(config)# interface ethernet 1/e6
Console(config-if)# lacp timeout long

show lacp ethernet

The show lacp ethernet Privileged EXEC mode command displays LACP information for Ethernet ports.
Syntax
• show lacp ethernet interface [parameters | statistics | protocol-state]
• interface — Valid Ethernet port. (Full syntax: unit/port)
• parameters — Link aggregation parameter information.
• statistics — Link aggregation statistics information.
• protocol-state — Link aggregation protocol-state information.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example display LACP information for Ethernet port 1/e1.
Console# show lacp ethernet 1/e1
Port 1/e1 LACP parameters:
Actor
system priority:
system mac addr:
port Admin key:
1
00:00:12:34:56:78
30
233
LACP Commands