Dell PowerConnect 3524 Cli Reference Manual page 337

Syntax
• snmp-server view view-name oid-tree {included | excluded}
• no snmp-server view view-name [oid-tree]
• view-name — Specifies the label for the view record that is being created or updated. The name is
used to reference the record. (Range: 1 - 30 characters)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded from the
view. To identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a
word, such as system. Replace a single subidentifier with the asterisk (*) wildcard to specify a
subtree family; for example 1.3.*.4. You may also identify the subtree by specifying its logical
name; for example, "IfEntry.*.1".
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode.
User Guidelines
• This command can be entered multiple times for the same view record.
• The number of views is limited to 64 including pre-configured views.
• No check is made to determine that a MIB node corresponds to the "starting portion" of the OID until
the first wildcard.
337
SNMP Commands