Syntax
•
show interfaces configuration [ethernet interface | port-channel port-channel-number ]
•
interface — Valid Ethernet port. (Full syntax: unit/port)
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode.
User Guidelines
•
To view information on autonegotiation capabilities, use the show interfaces advertise Privileged
EXEC mode command.
Example
The following example displays the configuration of all configured interfaces.
Console# show interfaces configuration
Port
Type
----
-------
----
1/e1
100M-
Copper
1/e2
100M-
Copper
1/e3
100M-
Copper
1/e4
100M-
Copper
1/e5
100M-
Copper
1/e6
100M-
Copper
1/e7
100M-
Copper
Duplex Speed Neg
------ ----- ------- ---- -----
Full
100
Enabled Off
Full
100
Enabled Off
Full
100
Enabled Off
Full
100
Enabled Off
Full
100
Enabled Off
Full
100
Enabled Off
Full
100
Enabled Off
Flow
Link
Back
Ctrl
State
Pressure
-------- ----
Up
Disabled Auto
Up
Disabled Auto
Up
Disabled Auto
Up
Disabled Auto
Up
Disabled Auto
Up
Disabled Auto
Up
Disabled Auto
Ethernet Configuration Commands
Mdix
Mode
173