Show Bridge Address-Table Count - Dell PowerConnect 3524 Cli Reference Manual

Example
The following example displays all static entries in the bridge-forwarding database.
Console# show bridge address-table static
Aging time is 300 sec
vlan
----
1
1
200

show bridge address-table count

The show bridge address-table count Privileged EXEC mode command displays the number of addresses
present in the Forwarding Database.
Syntax
• show bridge address-table count [vlan vlan][ ethernet interface-number | port-channel port-channel-
number]
• vlan — Specifies a valid VLAN, such as VLAN 1.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
114
Address Table Commands
mac address
-----------------
00:60:70:4C:73:FF
00:60:70:8C:73:FF
00:10:0D:48:37:FF
port type
---- -----------------
1/e8 Permanent
1/e8 delete-on-timeout
1/e9 delete-on-reset