Ipv6 Addressing Commands - Dell PowerConnect 3524 Cli Reference Manual

IPv6 Addressing Commands

Command Group
ipv6 enable
ipv6 address autoconfig
ipv6 icmp error-interval
show ipv6 icmp error-
interval
ipv6 address
ipv6 address link-local
ipv6 unreachables
ipv6 default-gateway
ipv6 mld join-group
ipv6 mld version
show ipv6 interface
show IPv6 route
ipv6 nd dad attempts
ipv6 host
ipv6 neighbor
ipv6 set mtu
show ipv6 neighbors
clear ipv6 neighbors
Description
Enables IPv6 processing on an interface.
Enables automatic configuration of IPv6 addresses
using stateless autoconfiguration on an interface.
Configures the rate limit interval and bucket size
parameters for IPv6 ICMP error messages.
Displays the IPv6 ICMP error interval setting
Configures an IPv6 address for an interface.
Configures an IPv6 link-local address for an
interface.
Enables the generation of Internet Control Message
Protocol for IPv6 (ICMPv6) unreachable messages
for any packets arriving on a specified interface.
Defines an IPv6 default gateway.
Configures Multicast Listener Discovery (MLD)
reporting for a specified group.
Changes the Multicast Listener Discovery Protocol
(MLD) version.
Displays the usability status of interfaces configured
for IPv6.
Displays the current state of the IPv6 routing table.
Configures the number of consecutive neighbor
solicitation messages that are sent on an interface
while duplicate address detection is performed on
the unicast IPv6 addresses of the interface.
Defines a static host name-to-address mapping in
the host name cache.
Configures a static entry in the IPv6 neighbor
discovery cache.
Sets the MTU size of IPv6 packets sent on an
interface.
Displays IPv6 neighbor discovery cache information.
Deletes all entries in the IPv6 neighbor discovery
cache, except static entries.
Access Mode
Interface Configuration
Interface Configuration
Global Configuration
Privileged EXEC
Interface Configuration
Interface Configuration
Interface Configuration
Global Configuration
Interface Configuration
Interface Configuration
Privileged EXEC
Privileged EXEC
Interface Configuration
Global Configuration
Global Configuration
Privileged EXEC
Privileged EXEC
Privileged EXEC
Command Groups
43