Example
The following example enables back pressure on port 1/e5.
Console(config)# interface ethernet 1/e5
Console(config-if)# back-pressure
clear counters
The clear counters User EXEC mode command clears statistics on an interface.
Syntax
•
clear counters [ethernet interface | port-channel port-channel-number]
•
interface — Valid Ethernet port. (Full syntax: unit/port)
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example clears the counters for interface 1/e1.
Console> clear counters ethernet 1/e1
set interface active
The set interface active Privileged EXEC mode command reactivates an interface that was shutdown.
Syntax
•
set interface active {ethernet interface | port-channel port-channel-number}
•
interface — Valid Ethernet port. (Full syntax: unit/port)
•
port-channel-number — Valid port-channel number.
170
Ethernet Configuration Commands