Radius Commands - Dell PowerConnect 3524 Cli Reference Manual

qos map dscp-queue
qos trust (Global)
qos trust (Interface)
qos cos
show qos map

RADIUS Commands

Command Group
radius-server host
radius-server key
radius-server
retransmit
radius-server source-ip
radius-server source-
ipv6
radius-server timeout
radius-server deadtime
show radius-servers
Modifies the DSCP to CoS map.
Configures the system to basic mode and the "trust"
state.
Enables each port trust state.
Configures the default port CoS value.
Displays all the maps for QoS.
Description
Specifies a RADIUS server host.
Sets the authentication and encryption key for all
RADIUS communications between the device and
the RADIUS daemon.
Specifies the number of times the software searches
the list of RADIUS server hosts.
Specifies the source IP address used for
communication with RADIUS servers.
Specifies the source IPv6 address used for the IPv6
communication with RADIUS servers.
Sets the interval for which a device waits for a server
host to reply.
Improves RADIUS response times when servers are
unavailable.
Displays the RADIUS server settings.
Global
Configuration
Global
Configuration
Interface
Configuration
Interface
Configuration
User EXEC
Access Mode
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Privileged EXEC
Command Groups
49