User Guidelines
There are no user guidelines for this command.
Example
The following example forces port 1/e1 to join port-channel 1 without an LACP operation.
Console(config)# interface ethernet 1/e1
Console(config-if)# channel-group 1 mode on
show interfaces port-channel
The show interfaces port-channel Privileged EXEC mode command displays port-channel information.
Syntax
•
show interfaces port-channel [port-channel-number]
•
port-channel-number — Valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information on all port-channels.
Console# show interfaces port-channel
Channel
-------
1
2
3
Ports
---------------------------------
Active: 1/e1, 2/e2
Active: 2/e2, 2/e7 Inactive: 3/e1
Active: 3/e3, 3/e8
Port Channel Commands
293