Ip Http Authentication - Dell PowerConnect 3524 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the default authentication method when accessing a higher privilege
level from a console.
Console(config)# line console
Console(config-line)# enable authentication default

ip http authentication

The ip http authentication Global Configuration mode command specifies authentication methods for
HTTP server users. Use the no form of this command to return to the default configuration.
Syntax
• ip http authentication method1 [method2...]
• no ip http authentication
• method1 [method2...] — Specify at least one from the following table:
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This has the same effect as the command ip http authentication
local.
Command Mode
Global Configuration mode.
User Guidelines
• The additional methods of authentication are used only if the previous method returns an error, not if
it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as
the final method in the command line.
Description
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
85
AAA Commands