Command Mode
MST Configuration mode.
User Guidelines
The pending MST region configuration takes effect only after exiting the MST configuration mode.
Example
The following example displays a pending MST region configuration.
Console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance
Vlans Mapped
--------
------------
0
1-9,21-4094
1
10-20
exit (mst)
The exit MST Configuration mode command exits the MST configuration mode and applies all
configuration changes.
Syntax
•
exit
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode.
User Guidelines
There are no user guidelines for this command.
State
-----
Enabled
Enabled
Spanning-Tree Commands
373