Show Ipv6 Icmp Error-Interval - Dell PowerConnect 3524 Cli Reference Manual

Syntax
• ipv6 icmp error-interval milliseconds [bucketsize]
• no ipv6 icmp error-interval
• milliseconds — The time interval between tokens being placed in the bucket, each token
represents a single ICMP error message. (Range: 0 - 2147483647)
• bucketsize — The maximum number of tokens stored in the bucket. (Range: 1 - 200)
Default Configuration
The default interval is 100ms and the default bucketsize is 10 tokens.
Command Mode
Global Configuration mode.
User Guidelines
• To set the average icmp error rate limit, calculate the interval by the following formula:
Average Packets Per Second = (1/ interval) * bucket size
Example
The following example configures the rate limit interval to 200ms and bucket size to 20 tokens for IPv6
Internet Control Message Protocol (ICMP) error messages.
Console (config)# ipv6 icmp error-interval 200 10

show ipv6 icmp error-interval

The show ipv6 error-interval command Privileged EXEC mode command displays the IPv6 ICMP error
interval setting.
Syntax
• show ipv6 icmp error-interval
Default Configuration
This command has no default setting.
Command Mode
Privileged EXEC mode.
User Guidelines
• There are no user guidelines for this command.
215
IPv6 Addressing