Show Snmp - Dell PowerConnect 3524 Cli Reference Manual

Syntax
• snmp-server set variable-name name1 value1 [ name2 value2 ...]
• variable-name — MIB variable name.
• name value — List of name and value pairs. In the case of scalar MIBs, only a single pair of name
values. In the case of an entry in a table, at least one pair of name and value followed by one or
more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
• Although the CLI can set any required configuration, there might be a situation where a SNMP user
sets a MIB variable that does not have an equivalent command. In order to generate configuration files
that support those situations, the snmp-server set command is used.
This
• command is case-sensitive.
Examples
The following example configures the scalar MIB sysName with the value dell.
Console(config)# snmp-server set sysName sysname dell

show snmp

The show snmp Privileged EXEC mode command displays the SNMP status.
Syntax
• show snmp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
350
SNMP Commands