Syntax
•
login authentication {default | list-name}
•
no login authentication
•
default — Uses the default list created with the aaa authentication login command.
•
list-name — Uses the indicated list created with the aaa authentication login command.
Default Configuration
Uses the default set with the command aaa authentication login.
Command Mode
Line Configuration mode.
User Guidelines
•
Changing login authentication from default to another value may disconnect the telnet session.
Example
The following example specifies the default authentication method for a console.
Console(config)# line console
Console(config-line)# login authentication default
enable authentication
The enable authentication Line Configuration mode command specifies the authentication method list
when accessing a higher privilege level from a remote telnet or console. Use the no form of this
command to return to the default configuration specified by the aaa authentication enable command.
Syntax
•
enable authentication {default | list-name}
•
no enable authentication
•
default — Uses the default list created with the aaa authentication enable command.
•
list-name — Uses the indicated list created with the aaa authentication enable command.
Default Configuration
Uses the default set with the aaa authentication enable command.
Command Mode
Line Configuration mode.
84
AAA Commands