Spanning-Tree Bpdu - Dell PowerConnect 3524 Cli Reference Manual

Default Configuration
Short path cost method.
Command Mode
Global Configuration mode.
User Guidelines
• This command applies to all Spanning Tree instances on the device.
• The cost is set using the spanning-tree cost command.
Example
The following example sets the default path cost method to long.
Console(config)# spanning-tree pathcost method long

spanning-tree bpdu

The spanning-tree bpdu Global Configuration mode command defines BPDU handling when the
Spanning Tree is disabled globally or on a single interface. Use the no form of this command to return to
the default configuration.
Syntax
• spanning-tree bpdu {filtering | flooding}
• no spanning-tree bpdu
• filtering — Filter BPDU packets when the Spanning Tree is disabled on an interface.
• flooding — Flood BPDU packets when the Spanning Tree is disabled on an interface.
Default Configuration
The default setting is flooding.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Spanning-Tree Commands
365