Traceroute - Dell PowerConnect 3524 Cli Reference Manual

Console> ping yahoo.com
Pinging yahoo.com (66.218.71.198) with 64 bytes of data:
64 bytes from 10.1.1.1: icmp_seq=0. time=11 ms
64 bytes from 10.1.1.1: icmp_seq=1. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=2. time=8 ms
64 bytes from 10.1.1.1: icmp_seq=3. time=7 ms
----10.1.1.1 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 7/8/11

traceroute

The traceroute User EXEC mode command discovers routes that packets actually take when traveling to
their destination.
Syntax
• traceroute ip-address |hostname [size packet_size] [ttl max-ttl] [count packet_count] [timeout
time_out] [source ip-address] [tos tos]
• traceroute ipv6 {ipv6-address | hostname} [size packet_size] [ttl max-ttl] [count packet_count]
[timeout time_out] [source ip-address] [tos tos]
• ipv6 — IPv6 checks the network connectivity.
• ip4-address — Destination host IPv4 address. (Range: Valid IP Address)
• ip6-address — Unicast or multicast IPv6 address to ping. When the IPv6 address is a Link Local
address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage
guidelines for the interface name syntax.
• hostname — Host name of the destination host. (Range: 1 - 158 characters)
• packet_size — Number of bytes in a packet. (Range: 40 - 1500)
• max-ttl — The largest TTL value that can be used. The traceroute command terminates when the
destination is reached or when this value is reached. (Range: 1 - 255)
• packet_count — The number of probes to be sent at each TTL level. (Range: 1 - 10)
• time_out — The number of seconds to wait for a response to a probe packet.
(Range: 1 - 60)
System Management
417