Example
The following example configures the HTTP authentication.
Console(config)# ip http authentication radius local
ip https authentication
The ip https authentication Global Configuration mode command specifies authentication methods for
HTTPS server users. Use the no form of this command to return to the default configuration.
Syntax
•
ip https authentication method1 [method2...]
•
no ip https authentication
•
method1 [method2...] — Specify at least one from the following table:
Keyword
local
none
radius
tacacs
Default Configuration
The local user database is checked. This has the same effect as the command ip https authentication
local.
Command Mode
Global Configuration mode.
User Guidelines
•
The additional methods of authentication are used only if the previous method returns an error, not if
it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as
the final method in the command line.
Example
The following example configures HTTPS authentication.
Console(config)# ip https authentication radius local
86
AAA Commands
Source or destination
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.