Show Ipv6 Interface - Dell PowerConnect 3524 Cli Reference Manual

Command Mode
Interface configuration (Ethernet, VLAN, Port-channel).
User Guidelines
• There are no user guidelines for this command.
Example
The following example defines an IPv6 default gateway.
Console(config-if)# ipv6 mld version 1

show ipv6 interface

The show ipv6 interface Privileged EXEC mode command displays the usability status of interfaces
configured for IPv6.
Syntax
• show ipv6 interface [ethernet interface-number | vlan vlan-id | port-channel number]
• ethernet interface-number — Ethernet port number
• vlan vlan-id — VLAN number
• port-channel number — Port channel number
Default Configuration
Displays all IPv6 interfaces.
Command Mode
Privileged EXEC mode.
User Guidelines
• To display IPv6 neighbor discovery cache information, use the show ipv6 neighbors command in the
privileged EXEC mode.
221
IPv6 Addressing