Ip Addressing Commands; Ip Address - Dell PowerConnect 3524 Cli Reference Manual

IP Addressing Commands

ip address

The ip address Interface Configuration (Ethernet, VLAN, port-channel) mode command sets an
IP address. Use the no form of this command to remove an IP address.
Syntax
ip address ip-address {mask | prefix-length}
no ip address [ip-address]
• ip-address — Valid IP address
• mask — Valid network mask of the IP address.
• prefix-length — Specifies the number of bits that comprise the IP address prefix. The prefix
length must be preceded by a forward slash (/). (Range: 8 - 30)
Default Configuration
No IP address is defined for interfaces.
Command Mode
Interface Configuration (Ethernet, VLAN, port-channel) mode.
User Guidelines
• An IP address cannot be configured for a range of interfaces (range context).
Example
The following example configures VLAN 1 with IP address 131.108.1.27 and subnet mask
255.255.255.0.
Console(config)# interface vlan 1
Console(config-if)# ip address 131.108.1.27 255.255.255.0
IP Addressing Commands
201