Dell PowerConnect 3524 Cli Reference Manual page 339

Syntax
• snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] } [read
readview] [write writeview]
• no snmp-server group groupname [v1 | v2 | v3 [noauth | auth | priv]] [context name]
• groupname — The name of the group. (Range: Up to 30 characters)
• v1 — SNMP Version 1 security model.
• v2 — SNMP Version 2 security model.
• v3 — SNMP Version 3 security model.
• noauth — Specifies no authentication of a packet. Applicable only to SNMP Version 3 security
model.
• auth— Specifies authentication of a packet without encrypting it. Applicable only to SNMP
Version 3 security model.
• priv —Specifies authentication of a packet with encryption. Applicable only to SNMP Version 3
security model.
• read readview — A string that is the name of the view that enables you only to view the contents of
the agent. If unspecified, all the objects except of the community-table and SNMPv3 user and
access tables are available. (Range: Up to 30 characters)
• write writeview — A string that is the name of the view that enables you to enter data and
configure the contents of the agent. If unspecified, nothing is defined for the write view. (Range:
Up to 30 characters)
• notify notifyview — A string that is the name of the view that enables you to specify an inform or a
trap. If unspecified, nothing is defined for the notify view. (Range: Up to 30 characters.)
Default Configuration
No group entry exists.
Command Mode
Global Configuration mode.
User Guidelines
The index of the group name table is comprised of Group Name, Security Model, and Security Level.
Different views for the same group can be defined with different security levels. For example, after
having created the appropriate views, a group can be created for which "no authentication" is required,
while allowing only notification view for "interfaces". A group of the same name can be created for which
"priv" authentication is required. Read views can, for example, be configured for this group for mib2, and
write views for interfaces. In this case, users in this group who send "priv" packets can modify all
"interfaces" MIBs and view all mib2.
339
SNMP Commands