Spanning-Tree Disable; Spanning-Tree Cost - Dell PowerConnect 3524 Cli Reference Manual

Command Mode
Global Configuration mode.
User Guidelines
The bridge with the lowest priority is elected as the root bridge.
Example
The following example configures Spanning Tree priority to 12288.
Console(config)# spanning-tree priority 12288

spanning-tree disable

The spanning-tree disable Interface Configuration mode command disables Spanning Tree on a specific
port. Use the no form of this command to enable Spanning Tree on a port.
Syntax
• spanning-tree disable
• no spanning-tree disable
Default Configuration
Spanning tree is enabled on all ports.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example disables spanning-tree on Ethernet port 1/e5.
Console(config)# interface ethernet 1/e5
Console(config-if)# spanning-tree disable

spanning-tree cost

The spanning-tree cost Interface Configuration mode command configures the Spanning Tree path cost
for a port. Use the no form of this command to return to the default configuration.
Spanning-Tree Commands
361