The following table describes significant fields shown above.
Field
Connection
Host
Address
Port
Byte
show system
The show system User EXEC mode command displays system information.
Syntax
•
show system [unit unit]
•
unit — Specifies the number of the unit. (Range: 1 - 8)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the system information.
Console> show system
Unit
----
1
2
3
4
5
430
System Management
Description
Connection number.
Remote host to which the device is connected through a Telnet session.
IP address of the remote host.
Telnet TCP port number
Number of unread bytes for the user to see on the connection.
Type
---------
PowerConnect 3524
PowerConnect 3524
PowerConnect 3524
PowerConnect 3524
PowerConnect 3524