Tunnel Commands - Dell PowerConnect 3524 Cli Reference Manual

passwords history hold-
time
passwords lockout
aaa login-history file
set username active
set line active
set enable-password
active
show passwords
configuration
show users login-history
show users accounts

Tunnel Commands

Command Group
interface tunnel
tunnel mode ipv6ip
tunnel isatap router
tunnel source
tunnel isatap query-
interval
tunnel isatap solicitation-
interval
tunnel isatap robustness
show ipv6 tunnel
56
Command Groups
Configures the number of days a password is
relevant for tracking its password history.
Sets the number of failed login attempts before a
user account is locked.
Enables writing to the login history file.
Reactivates a locked user account.
Reactivates a locked line.
Reactivates a locked enable password.
Displays information about password management.
Displays information about the login history of
users.
Displays information about the local user database.
Description
enters tunnel interface configuration mode.
configures an IPv6 transition mechanism global
support mode.
configures a global string that represents a specific
automatic tunnel router domain name.
sets the local (source) tunnel interface IPv4 address.
configures the interval between DNS Queries
(before the IP address of the ISATAP router is
known) for the automatic tunnel router domain
name.
configures the interval between ISATAP router
solicitations messages (when there is no active
ISATAP router).
configures the number of DNS Query/Router
Solicitation refresh messages that the device sends.
displays information on the ISATAP tunnel.
Global
Configuration
Global
Configuration
Global
Configuration
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Access Mode
Global
Configuration
Interface Tunnel
Configuration
Interface Tunnel
Configuration
Interface Tunnel
Configuration
Global
Configuration
Global
Configuration
Global
Configuration
Privileged EXEC