Switchport General Allowed Vlan - Dell PowerConnect 3524 Cli Reference Manual

Syntax
• switchport trunk native vlan vlan-id
• no switchport trunk native vlan
• vlan-id — Specifies the ID of the native VLAN.
Default Configuration
VID=1.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
The command adds the port as a member in the VLAN. If the port is already a member in the VLAN
(not as a native), it should be first removed from the VLAN.
Example
The following example configures VLAN number 123 as the native VLAN when Ethernet port 1/e16 is in
trunk mode.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport trunk native vlan 123

switchport general allowed vlan

The switchport general allowed vlan Interface Configuration mode command adds or removes VLANs
from a general port.
Syntax
• switchport general allowed vlan add vlan-list [tagged | untagged]
• switchport general allowed vlan remove vlan-list
add vlan-list — Specifies the list of VLAN IDs to be added. Separate non-consecutive VLAN IDs
•
with a comma and no spaces. A hyphen designates a range of IDs.
• remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate non-consecutive VLAN
IDs with a comma and no spaces. A hyphen designates a range of IDs.
• tagged — Indicates that the port transmits tagged packets for the VLANs.
• untagged — Indicates that the port transmits untagged packets for the VLANs.
474
VLAN Commands