Radius-Server Retransmit - Dell PowerConnect 3524 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
The following example defines the authentication and encryption key for all RADIUS communications
between the device and the RADIUS daemon.
Console(config)# radius-server key dell-server

radius-server retransmit

The radius-server retransmit Global Configuration mode command specifies the number of times the
software searches the list of RADIUS server hosts. Use the no form of this command to reset the default
configuration.
Syntax
radius-server retransmit retries
•
• no radius-server retransmit
• retries — Specifies the retransmit value. (Range: 1 - 10)
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the number of times the software searches the list of RADIUS server
hosts to 5 times.
console(config)# radius-server retransmit 5
RADIUS Commands
313