Ml (Mac Access-List) Mode; Pe (Privileged Exec) Mode - Dell PowerConnect 3524 Cli Reference Manual

instance (mst)
name (mst)
revision (mst)
show (mst)

ML (MAC Access-List) Mode

Command Group
permit (MAC)

PE (Privileged EXEC) Mode

Command Group
boot system
clear arp-cache
clear bridge
clear counters
clear gvrp statistics
clear host
clear host dhcp
clear ip dhcp snooping database Clears the DHCP snooping binding database.
clear logging
clear logging file
clear spanning-tree detected-
protocols
clock set
configure
copy
crypto certificate request
delete
delete startup-config
dir
Maps VLANs to the MST instance.
Defines the configuration name.
Defines the configuration revision number.
Displays the current or pending MST region configuration.
Description
Denies traffic if the conditions defined in the permit statement match.
Description
Specifies the system image that the device loads at startup.
Deletes all dynamic entries from the ARP cache.
Removes any learned entries from the forwarding database.
Clears statistics on an interface
Clears all the GVRP statistics information.
Deletes entries from the host name-to-address cache.
Deletes entries from the host name-to-address mapping received from
Dynamic Host Configuration Protocol (DHCP).
Clears messages from the internal logging buffer.
Clears messages from the logging file.
Restarts the protocol migration process on all interfaces or on the
specified interface.
Manually sets the system clock.
Enters the Global Configuration mode.
Copies files from a source to a destination.
Generates and displays certificate requests for HTTPS.
Deletes a file from a Flash memory device.
Deletes the startup-config file.
Displays a list of files on a flash file system.
.
Command Modes
73