Dell PowerConnect 3524 Cli Reference Manual page 142

backup-config
unit://member/
backup-config
logging
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
• The location of a file system dictates the format of the source or destination URL.
• The entire copying process may take several minutes and differs from protocol to protocol and
from network to network.
Understanding Invalid Combinations of Source and Destination
Some invalid combinations of source and destination exist. Specifically, the following cannot be
copied:
• If the source file and destination file are the same file.
• xmodem cannot be a destination. Can only be copied to image, boot and null.
• tftp cannot be the source and destination on the same copy.
• *.prv files can't be copied.
• Copy to or from the slave units is for image and boot files only.
The following table describes copy characters:
Character
!
.
Copying image file from a Server to Flash Memory
Use the copy source-url image command to copy an image file from a server to Flash memory.
Copying boot file from a Server to Flash Memory
Use the copy source-url boot command to copy a boot file from a server to Flash memory.
Copying a Configuration File from a Server to the Running Configuration
142
Configuration and Image Files
Represents the backup configuration file.
Backup configuration file on one of the units.
Copy from a syslog file.
Description
For network transfers, indicates that the copy process is taking place. Each
exclamation point indicates successful transfer of ten packets (512 bytes each).
For network transfers, indicates that the copy process timed out. Generally, many
periods in a row means that the copy process may fail.