Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 1/e16 to discard untagged frames at ingress.
Console(config)# interface ethernet 1/e16
Console(config-if)# switchport general acceptable-frame-type
tagged-only
switchport forbidden vlan
The switchport forbidden vlan Interface Configuration mode command forbids adding specific VLANs
to a port. To return to the default configuration, use the remove parameter for this command.
Syntax
•
switchport forbidden vlan {add vlan-list | remove vlan-list}
•
add vlan-list — Specifies the list of VLAN IDs to be added. Separate non-consecutive VLAN IDs
with a comma and no spaces. A hyphen designates a range of IDs.
•
remove vlan-list — Specifies the list of VLAN IDs to be removed. Separate non-consecutive VLAN
IDs with a comma and no spaces. A hyphen designates a range of IDs.
Default Configuration
All VLANs are allowed.
Command Mode
Interface Configuration (Ethernet, port-channel) mode.
User Guidelines
This command can be used to prevent GVRP from automatically making the specified VLANs active on
the selected ports.
477
VLAN Commands