Spanning-Tree Mst Max-Hops - Dell PowerConnect 3524 Cli Reference Manual

Syntax
• spanning-tree mst instance-id priority priority
• no spanning-tree mst instance-id priority
• instance-id — ID of the spanning -tree instance. (Range: 0 - 15)
• priority — Device priority for the specified spanning-tree instance. (Range: 0 - 61440 in multiples
of 4096)
Default Configuration
The default bridge priority for IEEE Spanning Tree Protocol (STP) is 32768.
Command Mode
Global Configuration mode.
User Guidelines
The device with the lowest priority is selected as the root of the Spanning Tree.
Example
The following example configures the Spanning Tree priority of instance 1 to 4096.
Console(config)# spanning-tree mst 1 priority 4096

spanning-tree mst max-hops

The spanning-tree mst max-hops Global Configuration mode command configures the number of hops
in an MST region before the BDPU is discarded and the port information is aged out. Use the no form of
this command to return to the default configuration.
Syntax
• spanning-tree mst max-hops hop-count
• no spanning-tree mst max-hops
• hop-count — Number of hops in an MST region before the BDPU is discarded .
(Range: 1 - 40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode.
Spanning-Tree Commands
367