Dell PowerConnect 3524 Cli Reference Manual page 92

Syntax
• permit {any| protocol} {any|{source source-wildcard}} {any|{destination destination-wildcard}}
[dscp number | ip-precedence number]
• permit-icmp {any|{source source-wildcard}} {any|{destination destination-wildcard}} {any|icmp-
type} {any|icmp-code} [dscp number | ip-precedence number]
• permit-igmp {any|{source source-wildcard}} {any|{destination destination-wildcard}} {any|igmp-
type} [dscp number | ip-precedence number]
• permit-tcp {any|{ source source-wildcard}} {any|source-port} {any|{ destination destination-
wildcard}} {any|destination-port} [dscp number | ip-precedence number] [flags list-of-flags] [src-
port-wildcard source-port-wildcard] [dst-port-wildcard source-port-wildcard]
• permit-udp {any|{ source source-wildcard}} {any| source-port} {any|{destination destination-
wildcard}} {any|destination-port} [dscp number | ip-precedence number] [src-port-wildcard source-
port-wildcard] [dst-port-wildcard ]
source — Specifies the source IP address of the packet.
•
• source-wildcard — Specifies wildcard bits to be applied to the sources IP address by placing 1s in
bit positions to be ignored.
destination — Specifies the destination IP address of the packet.
•
• destination- wildcard — Specifies wildcard bits to be applied to the destination IP address by
placing 1s in bit positions to be ignored.
• protocol — Specifies the name or the number of an IP protocol. Available protocol names: icmp,
igmp, ip, tcp, egp, igp, udp, hmp, rdp, idpr, idrp, rsvp, gre, esp, ah, eigrp, ospf, ipip, pim, l2tp,
isis. (Range: 0 - 255)
• dscp number — Specifies the DSCP value.
• ip-precedence number — Specifies the IP precedence value.
• icmp-type — Specifies an ICMP message type for filtering ICMP packets. Enter a number or one
of the following values: echo-reply, destination-unreachable, source-quench, redirect, alternate-
host-address, echo-request, router-advertisement, router-solicitation, time-exceeded, parameter-
problem, timestamp, timestamp-reply, information-request, information-reply, address-mask-
request, address-mask-reply, traceroute, datagram-conversion-error, mobile-host-redirect, mobile-
registration-request, mobile-registration-reply, domain-name-request, domain-name-reply, skip,
photuris. (Range: 0 - 255)
• icmp-code — Specifies an ICMP message code for filtering ICMP packets. (Range: 0 - 255)
• igmp-type — Specifies IGMP packets filtered by IGMP message type. Enter a number or one of the
following values: host-query, host-report, dvmrp, pim, cisco-trace, host-report-v2, host-leave-v2,
host-report-v3. (Range: 0 - 255)
• destination-port — Specifies the UDP/TCP destination port. (Range: 1 - 65535)
• destination-port-wildcard — Specifies wildcard bits to be applied to the destination port by placing
1s in bit positions to be ignored.
92
ACL Commands