switchport trunk allowed vlan
switchport trunk native vlan
traffic-shape
LC (Line Configuration) Mode
Command Group
autobaud
enable authentication
exec-timeout
history
history size
login authentication
password
password-aging
speed
MA (Management Access-level) Mode
Command Group
deny (Management)
permit (Management)
MC (MST Configuration) Mode
Command Group
abort (mst)
exit (mst)
72
Command Modes
Adds or removes VLANs from a port in general mode.
Defines the port as a member of the specified VLAN, and the VLAN ID
is the "port default VLAN ID (PVID)".
Sets the shaper on an egress port.
Description
Configures the line for automatic baud rate detection (autobaud)
Specifies the authentication method list when accessing a higher
privilege level from a remote telnet or console.
Configures the interval that the system waits until user input is
detected.
Enables the command history function.
Configures the command history buffer size for a particular line.
Specifies the login authentication method list for a remote telnet or
console.
Specifies a password on a line.
Sets the expiration time of line passwords in the local database.
Configures the baud rate of the line.
Description
Defines a deny rule.
Defines a permit rule.
Description
Exits the MST region configuration mode without applying
configuration changes.
Exits the MST region configuration mode and applies all configuration
changes.