Syntax
•
rmon event index type [community text] [description text] [owner name]
•
no rmon event index
•
index — Specifies the event index. (Range: 1 - 65535)
•
type — Specifies the type of notification generated by the device about this event. Possible values:
none, log, trap, log-trap.
•
community text — If the specified notification type is trap, an SNMP trap is sent to the SNMP
community specified by this octet string. (Range: 0 - 127 characters)
•
description text — Specifies a comment describing this event. (Range: 0 - 127 characters)
•
name — Specifies the name of the person who configured this event. If unspecified, the name is
an empty string.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
If log is specified as the notification type, an entry is made in the log table for each event. If trap is
specified, an SNMP trap is sent to one or more management stations.
Example
The following example configures an event identified as index 10 and for which the device generates a
notification in the log table.
Console(config)# rmon event 10 log
show rmon events
The show rmon events User EXEC mode command displays the RMON event table.
Syntax
•
show rmon events
Default Configuration
This command has no default configuration.
331
RMON Commands