Command Modes
Privileged EXEC mode.
User Guidelines
•
There are no user guidelines for this command.
Example
The following example restarts the LLDP RX state machine and clearing the neighbors table.
console(config)# exit
console# clear lldp rx
console#
show lldp configuration
To display the Link Layer Discovery Protocol (LLDP) configuration, use the show lldp configuration
command in privileged EXEC mode.
Syntax
•
show lldp configuration [ethernet interface]
Interface — Ethernet port
•
Command Modes
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
261
LLDP Commands