Show Snmp Engineid - Dell PowerConnect 3524 Cli Reference Manual

Command line interface guide
Hide thumbs Also See for PowerConnect 3524:
Table of Contents

Advertisement

The following table describes significant fields shown above.
Field
Community-string
Community-access
IP Address
Trap-Rec-Address
Trap-Rec-Community
Version

show snmp engineid

The show snmp engineID Privileged EXEC mode command displays the ID of the local Simple Network
Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the SNMP engine ID.
Console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
352
SNMP Commands
Description
Community access string to permit access to the SNMP protocol.
Type of access - read-only, read-write, super access
Management station IP Address.
Targeted Recipient
Statistics sent with the notification operation.
SNMP version for the sent trap 1 or 2.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents