Configuration And Image Files; Copy - Dell PowerConnect 3524 Cli Reference Manual

Configuration and Image Files

copy

The copy Privileged EXEC mode command copies any file from a source to a destination.
Syntax
• copy source-url destination-url [snmp]
• source-url — The location URL or reserved keyword of the source file to be copied.
• destination-url — The destination file URL or reserved keyword of the destination file.
• snmp — Used only when copying from/to startup-config. Specifies that the
destination/source file is in SNMP format
The following table displays keywords and URL prefixes:
Keyword
flash
running-config
startup-config
image
boot
tftp:
xmodem:
unit://member/
startup-config
unit://member/
image
null:
Source or destination
Source or destination URL for Flash memory. It's the default in case a URL is
specified without a prefix
Represents the current running configuration file.
Represents the startup configuration file.
If source file, represent the active image file. If destination file, represent the
non-active image file.
Boot file.
Source or destination URL for a TFTP network server. The syntax for this alias is
tftp://host/[directory]/filename. The host can be either IP address or hostname.
An out-of-band IP address can be specified as described in the usage guidelines.
Source for the file from a serial connection that uses the Xmodem protocol.
Configuration file used during initialization (startup) on one of the units.
Image file on one of the units. For copy from master to all units you can use "*" in
the member field.
Null destination for copies or files. A remote file can be copied to null to
determine its size.
Configuration and Image Files
141