Show Bridge Multicast Address-Table Static - Dell PowerConnect 3524 Cli Reference Manual

show bridge multicast address-table static

The show bridge multicast address-table static Privileged EXEC mode command displays the statically
configured multicast addresses.
Syntax
• show bridge multicast address-table static [vlan vlan-id] [address mac-multicast-address | ip-multicast-
address] [source ip-address]
• vlan-id — Indicates the VLAN ID. This has to be a valid VLAN ID value.
• mac-multicast-address — A valid MAC multicast address.
• ip-multicast-address — A valid IP multicast address.
• ip-address — Source IP address.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
A MAC address can be displayed in IP format only if it's in the range 0100.5e00.0000 through
0100.5e7f.ffff.
Example
Console# show bridge multicast address-table static
MAC-GROUP table
Vlan MAC Address
---- --------------
1 0100.9923.8787
Forbidden ports for multicast addresses:
Vlan MAC Address
---- --------------
118
Address Table Commands
Type Ports
------- ----------
static 1/e1, 2/e2
Ports
-----