Syntax
•
snmp-server host {ip4-address | ip6-address | hostname} community-string [traps | informs] [1 | 2]
[udp-port port] [filter filtername] [timeout seconds] [retries retries]
•
no snmp-server host {ip4-address | ip6-address | hostname} [traps | informs]
•
ip4-address — The host IPv4 address (the targeted recipient).
•
ip6-address — The host IPv6 address (the targeted recipient). When the IPv6 address is a Link
Local address (IPv6Z address), the outgoing interface name must be specified. Refer to the usage
guidelines for the interface name syntax.
•
hostname — Specifies the name of the host. (Range:1 - 158 characters)
•
community-string — Specifies a password-like community string sent with the notification
operation. (Range: 1 - 20)
•
traps — Indicates that SNMP traps are sent to this host. If unspecified, SNMPv2 traps are sent to
the host.
•
informs — Indicates that SNMP informs are sent to this host. Not applicable to SNMPv1.
•
1 — Indicates that SNMPv1 traps will be used.
•
2 — Indicates that SNMPv2 traps will be used. If
•
port — Specifies the UDP port of the host to use. If unspecified, the default UDP port number is
162. (Range: 1 - 65535)
•
filtername — Specifies a string that defines the filter for this host. If unspecified, nothing is
filtered. (Range: 1 - 30 characters)
seconds — Specifies the number of seconds to wait for an acknowledgment before resending
•
informs. If unspecified, the default timeout period is 15 seconds.
(Range: 1 - 300)
•
retries — Specifies the maximum number of times to resend an inform request. If unspecified, the
default maximum number of retries is 3. (Range: 0 - 255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
•
When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient
is automatically generated for all the MIB.
•
When configuring an SNMPv1 notification recipient, the Inform option cannot be selected.
345
SNMP Commands