Show Ip Interface - D-Link xStack DWS-3200 Series Cli Manual

show ip interface

The show ip interface Privileged EXEC mode command displays the usability status of configured IP interfaces.
Syntax
show ip interface [ethernet interface-number | vlan vlan-id | port-channel port-channel number |]
Parameters
•
interface-number — Specifies the valid Ethernet port.
•
vlan-id — Specifies the valid VLAN number.
•
port-channel number — Specifies the valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example the displays the configured IP interfaces and their types.
Console# show ip interface
Proxy ARP is disabled
IP address
-------------
10.7.1.192/24
10.7.2.192/24
I/F Type
---------
1 Static
2 Static
Page 148
IP Address Commands
show ip interface
Direct Broadcast
----------------
disable
disable