DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
The window is used to create the static host name entry of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings as
shown below:
The fields that can be configured are described below:
Parameter
Host Name
IP Address
IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.
DNS Resolver Dynamic Host Name Table
This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:
PPPoE Circuit ID Insertion Settings
This window is used to configure the PPPoE circuit ID insertion function.
To view this window, click Network Application > PPPoE Circuit ID Insertion Settings as shown below:
Figure 9-14 DNS Resolver Static Host Name Settings window
Description
Enter the name of the host.
Click the radio button and enter the IPv4 address of the host here.
Click the radio button and enter the IPv6 address of the host here.
Figure 9-15 DNS Resolver Dynamic Host Name Table window
257