Fabric Binding Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual

Diagnostics
Figure 27: Fabric Binding dialog box
2. At the Fabric List section, ensure the Enable/Disable check box is enabled
3. At the Membership List of <Fabric Name> section, update the membership
Did updating the fabric membership lists solve the problem?
NO
Contact the next level of support. Exit MAP.
31
A port connection is not allowed because of a switch binding mismatch. Switch
membership lists must be compatible for both fabric elements.
1. At the Hardware View for each switch, click Configure > Switch Binding >
106
(checked) for the fabric containing both switches.
list for both elements to ensure interswitch compatibility, then click OK. The
fabric binding feature is consistently enabled for both switches.
YES
The switch appears operational. Exit MAP.
Edit Membership List. The Switch Binding - Membership List dialog box
displays (Figure 28).
Edge Switch 2/24 Service Manual