HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 113

All interswitch links resume operation after CTP reset. Perform the data collection
procedure and return the CD to HP for analysis. Exit MAP.
12
As indicated by an event code 062, the Fabric Controller software detected a path
to another fabric element (director or switch) in a multiswitch fabric that traverses
more than three interswitch links (hops). Fibre Channel frames may persist in the
fabric longer than timeout values allow.
Advise the customer of the problem and work with the system administrator to
reconfigure the fabric so the path between any two fabric elements does not
traverse more than three hops.
Did fabric reconfiguration solve the problem?
NO
Contact the next level of support. Exit MAP.
13
As indicated by an event code 063, the Fabric Controller software detected an:
Fibre Channel frames may be lost or routed in loops because of potential fabric
routing problems. Advise the customer of the problem and work with the system
administrator to reconfigure the fabric so that no director or switch elements have
more than the proscribed number of ISLs.
Did fabric reconfiguration solve the problem?
NO
Contact the next level of support. Exit MAP.
14
A 070 event code indicates an E_Port detected an incompatibility with an attached
switch and prevented the switches from forming a multiswitch fabric. A
segmented E_port cannot transmit Class 2 or Class 3 Fibre Channel traffic.
Edge Switch 2/24 Service Manual
YES
The switch and multiswitch fabric appear operational. Exit MAP.
Director 2/64 in a multiswitch fabric that has more than 48 ISLs attached.
Other fabric element (other than an Director 2/140) in a multiswitch fabric
that has more than 32 ISLs attached.
YES
The switch and multiswitch fabric appear operational. Exit MAP.
Diagnostics
115