Adding And Removing Switches; Persisting And Unpersisting Fabrics; Fabric Binding Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

The Fabric Binding dialog box appears
Figure 47

Fabric Binding dialog box

Select the Enable/Disable check box for the fabric for which you want to configure fabric
2.
binding.
Click OK.
3.

Adding and removing switches

With fabric binding enabled, you can add or remove switches from the membership list.
• To add switches to the selected fabric's membership list, select the switches from the Available
Switches list in the Fabric Binding dialog box, and click
membership list.
• To add a switch that does not have physical connection to the fabric:
a. Click Add Detached Switch.
b. Enter the appropriate information in the following boxes:
• Domain ID
• Node WWN
c. Click OK.
• To remove switches from the selected fabric's membership list, select the switches from the
Membership List in the Fabric Binding dialog box. Click
Switches list.

Persisting and unpersisting fabrics

When you persist a fabric, you take a snapshot of the fabric's products and connections. This serves
as a reference point for future comparisons. You can export the persisted fabric information for
future reference. See
84 Configuring SAN products and fabrics
"Exporting data" on page 44.
(Figure 47).
to move the switches to the
to move the switches to the Available