HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 34

Diagnostics
12
Port beaconing is enabled.
1. Consult the customer and next level of support to determine the reason port
2. Disable port beaconing:
Continue to the next step.
13
At the View panel, does the Operational State field display a Segmented
message?
NO
14
At the View panel, does the Operational State field display a message indicating
a port problem?
NO
15
Repeat
problem is suspected (ports 0 through 23).
Is a problem indicated for any of the ports?
NO
36
beaconing is enabled.
a. At the View panel, click Operations at the left side of the panel. The
Operations panel opens with the Beaconing page displayed.
b. Click the Beaconing State check box for the port. The check mark
disappears and port beaconing is disabled.
c. Return to the View panel (Port Properties tab).
YES
Port segmentation is indicated. Go to
no event codes are found, go to
Segmented Port Problem
YES
Go to step 18
"MAP 0600: Port Failure and Link Incident
Exit MAP.
step 11 through step 14
YES
"MAP 0700: Fabric, ISL, and
Determination" on page 118. Exit MAP.
to obtain event codes. If no event codes are found, go to
for each remaining Fibre Channel port for which a
step 18 to obtain event codes. If
Analysis" on page 100.
Edge Switch 2/24 Service Manual