Figure 28: Switch Binding - Membership List dialog box
2. At the Switch Binding - Membership List dialog box ensure the Switch
Did updating the switch membership lists solve the problem?
NO
Contact the next level of support. Exit MAP.
32
A port connection is not allowed because of a Computer Network Technologies
(CNT) wide area network (WAN) extension mode mismatch. Based on
switch-to-switch differences between the ELP maximum frame sizes allowed, a
connection was not allowed to a switch set to CNT WAN extension mode.
Contact HP support personnel to obtain software maintenance release 4.02.00.
This release is required to correct the problem and allow HP switches to
communicate with CNT UltraEdge WAN Gateways. Exit MAP.
Edge Switch 2/24 Service Manual
Membership List is updated and correct for each switch, then click Activate
for each switch. The switch binding feature is consistently enabled for both
switches.
YES
The switch appears operational. Exit MAP.
Diagnostics
107