HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 79

Does the customer want the second HAFM appliance configured as a client?
YES
22
Determine the internet protocol (IP) address of the HAFM appliance running the
first instance of HAFM.
1. After the HAFM appliance powers on and successfully completes POSTs, the
2. After a few seconds, the LCD panel displays the following
LAN 2:
010.001.001.001
Figure 20: LCD panel (LAN 2 IP address)
3. Depending on switch-to-HAFM appliance LAN connectivity, record the
Continue to the next step.
Edge Switch 2/24 Service Manual
Configure the HAFM appliance running the second instance of the application
as a client workstation.
NO
Power off the HAFM appliance reporting the Duplicate Session
communication problem. Exit MAP.
LCD panel displays a Welcome!! message, then continuously cycles
through and displays the following operational information:
— Host name.
— System date and time.
— LAN 1 and LAN 2 IP addresses.
— Fan rotational speed.
— CPU temperature.
— Hard disk capacity.
— Virtual and physical memory capacity.
appropriate IP address (LAN 1 or LAN 2).
Diagnostics
(Figure 20):
81