HP 316095-B21 - StorageWorks Edge Switch 2/24 Service Manual page 270

Event Codes
Table 88: Event Code 453
Message: New feature key installed.
Severity: Informational.
Explanation: This event occurs when a new feature key is installed from the HAFM appliance or
EWS interface. The switch performs an IPL when the feature key is enabled. Event
data indicates which feature or features are installed.
Action: No action required.
Event Data: Byte 0 = feature description as follows: 00 through 04 = Flexport, 06 =
open-system management server.
Byte 1 = feature description as follows: 06 = SANtegrity Binding, 07 = Open
Trunking
Distribution: Switch
EWS
Event
Log
Table 89: Event Code 460
Message: Management request out of range.
Severity: Informational
Explanation: This event occurs when requests passed from the managing tool (generally HAFM) to
the switch do not meet data boundary specifications. This event is most likely to be
triggered if a user attempt to activate a zone set that is larger than the maximum
defined zone set size.
Action: The switch found request data from the management tool to be larger or smaller than
expected. The connection to the management tool will be temporarily lost. After the
link is re-established, verify that all information changed in the managing tool is
within the specified ranges. For example, verify that the zones and zone members in
a zone set fall within the limits stated in the user manual. Try sending the request
again.
Event Data: None
Distribution: Switch
EWS
Event Log
288
HAFM Appliance
System Event
Error Log
LED
HAFM Appliance
System Event Log
Error LED
E-Mail Call
Home
E-Mail Call
Home
Edge Switch 2/24 Service Manual
Host
Sense Link
Info Incident
Host
Sense Link
Info Incident