Configuring Fabric Binding; Enabling Fabric Binding; Fabric Binding Dialog Box - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring Fabric Binding

Fabric Binding enables you to configure whether switches can merge with a selected fabric. This
provides security from accidental fabric merges and potential fabric disruption.
Fabric Binding requires the installation of a security feature called SANtegrity. See
features" on page 128 for details.
NOTE: You cannot disable Fabric Binding if Enterprise Fabric Mode is enabled.

Enabling Fabric Binding

You enable Fabric Binding using the Fabric Binding dialog box. After you enable Fabric Binding,
use the Membership List to add switches that you want to allow in the fabric.
1. Select Configure > Fabric Binding.
The Fabric Binding dialog box is displayed
Figure 59

Fabric Binding dialog box

2. Select the Enable/Disable check box for the fabric for which you want to configure Fabric
Binding.
3. Click OK.
106 Configuring SAN products and fabrics
(Figure 59).
"SANtegrity