Repair Information
4. Remove the backup disk from the HAFM appliance backup drive and insert a
5. At the Save Data Collection dialog box, select the backup drive from the
6. A dialog box displays, as shown in
Figure 43: Data Collection dialog box
7. Click Close to close the dialog box.
8. Remove the backup disk with the newly collected maintenance data from the
To ensure the backup application operates normally, replace the original backup
disk in the HAFM appliance backup drive.
164
blank backup disk.
Look in: drop-down menu, then type a descriptive name for the collected
maintenance data in the File name field. Ensure the file name has a .zip
extension, then click Save.
percent completion of the data collection process. When the process reaches
100%, Cancel changes to Close.
HAFM appliance backup drive. Return the backup disk with the failed FRU to
HP for failure analysis.
Figure
43, with a progress bar that shows
Edge Switch 2/24 Service Manual